Signode BXT2 Instructions d'exploitation télécharger pdf (Page 18)

ak 3.11

BXT 2 BXT 2-19

7.4. Tensioning gear

8. Assembly

To assembly the tool, simply proceed in the opposite way. Please consider the explosion drawing which

is printed on the last pages of the operating and safety instructions. All positions which are marked with

* have to be secured. Most screwings are TufLok ® coated and secured. Do not use these screws several

times. Replace them with new original screws or secure them with loctite.

Moving parts need to be lubricated. Please consider

chapter 10.

Information about how to assemble the wiring and the

housing can be found in chapter 11.

1. Remove retaining ring (Pos. 136). The bevel

wheel complete is now free to be pulled out.

2. Remove the tension wheel, the planetary

wheels and the cam disk (Pos. 44-46 & 18) from

flange complete (Pos.32).

3. Loosen the screw connection

(5xPos.41) and remove retaining ring

(Pos 40). All other gear parts can now

easily be removed.

Screw with TufLok ®-

coating

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 32 33

Pas de commentaire

Signode BXT2 Instructions d'exploitation Page 18