Signode BXT2 Instructions d'exploitation télécharger pdf (Page 15)

ak 3.11

BXT 2 BXT 2-19

7. Disassembling

Please consider the explosion drawing which is printed on the last pages of the operating instructions.

Purpose of this manual is only to draw the technician’s attention to the most relevant issues.

7.1. Housing/electrical components

Important!

The connectors and cables have to be treated carefully. Never pull on the wiring to

disconnect the connectors.

1. Remove the screws

of the motor cover

(Pos. 191) and pull it

slightly backwards.

6. Remove side cover

(Pos. 175), 4 x Screw M4

(Pos. 41). Loosen the

screws of the housing, 7

x Pos.197.

Disassemble the housing

(notice the picture). Pay

attention to the wiring,

the housing cannot yet

be removed completely.

5. Disconnect the motor from the

power electronics

2. Disconnect

the intermediate

cable (Pos. 201)

4. Disconnect and remove the

intermediate cable (Pos. 201).

3. Disconnect the signal cable

(Pos. 202) from the PCB. If the

harness is secured with a cable

tie, cut tit.

Remove the motor cover.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 32 33

Pas de commentaire

Signode BXT2 Instructions d'exploitation Page 15