Signode BXT2 Instructions d'exploitation télécharger pdf (Page 22)

ak 3.11

BXT 2 BXT 2-19

Important! Do not set the

connections under tension while

assembling. Connections might

get loose due to vibrations during

operation.

Mount the motor cover in a way

that the signal cable rests in front

of the first vent slot.

6. Secure cable (Pos.

103) with cable strap.

Pay attention to strain

relief to microswitch!

7. Mount intermediate

cable (Pos. 201) and

secure it at the

retaining bracket.

8. Now the motorhousing with Printed circuit board can

be mounted. Pay attention to accurate fitting at all the

connections.The 2 small pins on the connectors have to

fit into their counterparts.

First the signal cable (Pos. 202) is connected. Best way

to so is to place the tool at the edge of the table. Secure

the cable with cable tie (consider product information 2,

Nov 2010).

9. Put the motor housing over the

motor and move it forward. Connect

the intermediate cable to the PCB, click

the housing into place and screw it on.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 32 33

Pas de commentaire

Signode BXT2 Instructions d'exploitation Page 22